IWAVE COMMUNICATIONS CO.,LTD
Iwave Communications Co., Limited.
Add to Cart
Miniature 33g Drone video transmitter 10km downlink
Description
Integrate the FD-7800 IP MESH Embedded Module into your products to unite UAVs, UGVs, and sensors on a single mesh network. Because the Embedded Module features a 100Mbps bandwidth for HD video and serial data based IP, which can eliminate redundant equipment from your platform.The FD-7800 can support up to 32 nodes, up to 6 levels of jumping, the total uplink and downlink bandwidth is up to 100Mbps, and the communication distance can reach 10km (line-of-sight) and 1-3km(non line of sight)
Key Features
Supports Ethernet and full duplex telemetry data transmission.
It adopts the Automatic frequency hopping technology for anti-interference greatly reduce system power consumption and size of the module.
The miniature, lightweight and robust design allows the FD-7800 to be an ideal candidate for size sensitive applications. The high speed, long range capabilities of the FD-7800 allow for high quality wireless video and telemetry communications.
Supports 600(566-678Mhz) and 1.4Ghz(1420-1530Mhz) adjustable by software.
Supports up to 32 nodes of dynamic networking, and the maximum distance of a single hop is 5KM.
Supports up to 31 cascade jumps. In an ideal situation (adjacent node SNR ≥ 15), the terminal transmission rate can reach 6Mbps.
Lower power consumption, supports sleep mode. Average standby power consumption (connected state, no data transmission) <2W, typical working power consumption <10w (high bandwidth data transmission).
Application
Ethernet Wireless Extension
UGV Fleet Communication and management.
Mobile Team Communication
UAV Swarm Wireless Communication
Wireless Telemetry Data
Wireless Video
Control Systems for Unmannded Platform
Specification
| Wireless | |
| Technology | Wireless based on TD-LTE Technology Standard |
| Encryption | ZUC/SNOW3G/AES(128) Optional Layer-2 |
| Data Rate | Max 120Mbps(Uplink and Downlink) |
| Communication Range | Air to ground 10km NLOS Ground to ground 1-3km |
| Node | 32node |
| MIMO | 2x2 MIMO |
| RF Power | 23dBm±2 (2w, 5w or 10w on request) |
| Latency | End to end≤5ms-15ms |
| Modulation | Adaptive QPSK, 16QAM, 64QAM |
| Anti-Jamming | FHSS(Frequency Hop Spread Spectrum) |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz |
| Power Consumption | 5watts |
| Power Input | DC5-32V |
| Dimension | 72*60*10mm |
| Weight | 33g |
| Serial Data | RS232/TTL |
| Communication | Full duplex communication |
| Up and Down Ratio | 2D3U/3D2U/4D1U/1D4U |
| Automatic Reconstruction | Automatic re-establishment after link failure/ re-deploy the network after a link failure |
| Dual Band Frequency | 1.4G: 1420Mhz-1530MHz |
| 600Mhz: 566Mhz-678Mhz | |
| Interface | |
| RF | 2 x SMA |
| LAN Port | 2x Ethernet Port |
| Comuart | 1xCOMUART TTL 3.3V level, 1 start bit, 8 data bits, 1 stop bit , no parity check Baud Rate: 115200bps(Default) (57600, 38400, 19200, 9600 configurable) |
| Power Input | 1xDC INPUT: DC5-32V |
| Sensitivity | |
| 1.4GHZ | 20Mhz: -102dBm |
| 10Mhz: -100dBm | |
| 5Mhz: -96dBm | |
| 600Mhz | 20Mhz: -102dBm |
| 10Mhz: -100dBm | |
| 5Mhz: -96dBm | |
| Environment | |
| Working Temperature | -40℃~+80℃ |
