IWAVE COMMUNICATIONS CO.,LTD
Add to Cart
Model: FDM-6680
120Mbps MIMO(2x2) NLOS Wireless Ethernet & Full Duplex TTL Serial Data Link
TThe FDM-6680 is a cutting-edge wireless transmission product designed by IWAVE, utilizing a mature System on Chip (SoC) chipset. It supports both point-to-point and point-to-multipoint communication, making it versatile for various applications.
Dual Frequency 600Mhz & 1.4 GHz MIMO(2X2) Digital Data Link achieves robust RF performance and high data rate up to 120 Mbps. It is particularly well suited to providing robust wireless video links in mobile and non-line-of-sight urban environments with a range of 500meters -3km.
Key Features:
Stable Link at High Speeds:
The FDM-6800 can maintain a stable communication link even at speeds of up to 300 km/h, making it suitable for applications in dynamic environments such as vehicles and drones.
High throughput Data Rates :
Achieves 120 Mbps for both uplink and downlink simultaneously, allowing for efficient real-time data streaming and communication.
Support for Multiple Nodes:
One central node can support up to 64 sub-nodes, making it scalable for larger networks.
MIMO Technology:
Utilizes 2x2 Multiple-Input and Multiple-Output (MIMO) technology to enhance data throughput and reliability by using multiple antennas for transmission and reception.
Dynamic Power Adjustment:
The system can adaptively adjust transmitting and receiving power based on channel conditions. This feature helps to:1.Reduce Power Consumption: Optimizes energy use based on the current network environment.2.Minimize Network Interference: Helps maintain a clear communication link by reducing potential interference with other devices.
Applications:
The FDM-6680 is well-suited for various applications, including:
High-Speed Transportation: Suitable for trains, vehicles, and drones that require reliable communication at high speeds.
Real-Time Surveillance: Transmitting video feeds from moving platforms.
Remote Monitoring: Utilized in environments where mobility and data integrity are crucial.
Interface
P1: USB Interface, P2: Ethernet Port, P3: Ethernet Port & POE, P4: Power Input
P5: DBB_COMUAR, P6: UART0, P7: RF Port, P8: RF Port, P9: DBB_RFGPO, P10: DBB_RFGPO
| GENERAL | ||
| TECHNOLOGY | Wireless based on TD-LTE Technology Standards | |
| ENCRYPTION | ZUC/SNOW3G/AES(128) Optional Layer-2 | |
| DATA RATE | Max 120Mbps(Uplink and Downlink) | |
| RANGE | 10km-15km(Air to ground)500m-3km(NLOS Ground to ground) | |
| CAPACITY | Point to 64-Point | |
| MIMO | 2x2 MIMO | |
| POWER | 23dBm±2 (2w or 10w on request) | |
| LATENCY | End to end≤20ms-50ms | |
| MODULATION | QPSK, 16QAM, 64QAM | |
| ANTI-JAM | Automatically Cross-Band frequency hopping | |
| BANDWIDTH | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | |
| POWER CONSUMPTION | 5Watts | |
| POWER INPUT | DC12V | |
| WIRELESS | ||
| COMMUNICATION | Communication between any 2 slave nodes must be forwarded through the master node | |
| MASTER NODE | Any node in the network can be configured as the master node. | |
| SLAVE NODE | All nodes support unicast, multicast, and broadcast | |
| ACCESS | Multiple slave nodes can access the network simultaneously. | |
| 1.4GHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| 600MHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| FREQUENCY BAND | ||
| 1.4Ghz | 1420Mhz-1530MHz | |
| 600Mhz | 566Mhz-678Mhz | |
| MECHANICAL | ||
| TEMPERATURE | -40℃~+80℃ | |
| WEIGHT | 60grams | |
| INTERFACES | ||
| RF | 2 x SMA | |
| ETHERNET | 2xEthernet | POE |
| Ethernet port for data(4Pin) | ||
| COMUART | 1xCOMUART | RS232 3.3V level, 1 start bit, 8 data bits, 1 stop bit , no parity check |
| Baud Rate: 115200bps(Default) (57600, 38400, 19200, 9600 configurable) | ||
| POWER | 1xDC INPUT | DC12V |
| USB | 1xUSB | |