IWAVE COMMUNICATIONS CO.,LTD
Iwave Communications Co., Limited.
Add to Cart
NLOS Video And Control Data Transmission System For Unmanned Excavators
Description
The FDM-605PTM is a cutting-edge network board designed for long-range video and data downlink applications, offering robust performance in challenging Non-Line-of-Sight (NLOS) environments. Specifically tailored for unmanned excavators, tractors, cranes, and vehicles, this solution ensures seamless communication over distances of 1-5 km in forests, harsh terrains, and urban settings.
Key Features
|  |
Point-to-Multi-Point Connectivity
Supports multiple airborne transmitters sending HD video and TTL data to a single ground-based receiver, ensuring centralized monitoring and control.
Optimized for NLOS Environments
Excels in obstructed communication scenarios, including dense forests, rugged terrains, and complex urban environments.
Smart Antenna MIMO Technology
Provides real-time HD video transmission and broadband Ethernet connectivity at a data rate of 30 Mbps.
Lightweight and Compact Design
Weighing just 150g, it is ideal for integration into unmanned machinery where weight efficiency is crucial.
Secure Communication Options
Available in 5W and 10W power versions, enabling encrypted communication in complex RF environments.
Application
Point to multiple- point long-distance communication
Power and hydrological line patrol monitoring
Emergency communications for firefighting, border defense, and military
Maritime communications, Digital oilfield, Fleet formation
Specification
| GENERAL | MECHANICAL | ||
| TECHNOLOGY | Wireless based on TD-LTE Access Technology | TEMPERATURE | -20+55ºC |
| ENCRYPTION | ZUC/SNOW3G/AES (128/256) OptionalLayer-2 Encryption | DIMENSIONS | 116*70*17mm |
| DATE RATE | 30Mbps | WEIGHT | 100g |
| SENSITIVITY | -103dBm | ||
| RANGE | 50km (Air to ground) | MATERIAL | Silver Anodized Aluminum |
| MODE | Point to multi-point | MOUNTING | Onboard |
| MIMO | 2x2 MIMO | POWER | |
| MODULATION | QPSK, 16QAM, 64QAM | ||
| RF POWER | 33dbm | VOLTAGE | DC 12V |
| LATENCY | End to END: 60ms-80ms | POWER CONSUMPTION | 11watts |
| ANTI-JAM | Automatically frequency hopping | ||
| FREQUENCY | INTERFACES | ||
| 1.4Ghz | 1427.9-1447.9MHz | RF | 2 x SMA |
| 800Mhz | 806-826 MHz | ETHERNET | 1xJ30 |
| 2.4Ghz | 2401.5-2481.5 MHz | ||
| PWER INPUT | 1xJ30 | ||
| TTL Data | 1xJ30 | ||
| Debug | 1xJ30 | ||
| COMUART | |
| Electrical Level | 3.3V and compatible with 2.85V |
| Control Data | RS232 |
| Baud rate | 115200bps |
| Transmission Mode | Pass-through mode |
| Priority Level | Higher priority than the network portWhen the signal transmission is crowed, the control data will be transmitted in priority |
| Note: 1. The data transmitting and receiving is broadcast in the network. After successful networking, each FDM-605PTM unit can receive serial data. 2. If you want to distinguish between sending, receiving and control, you need to define the format yourself | |
| SENSITIVITY | ||
| 1.4GHZ | 20MHZ | -100dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |
| 800MHZ | 20MHZ | -100dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |