IWAVE COMMUNICATIONS CO.,LTD
Iwave Communications Co., Limited.
Add to Cart
Wireless Digital Video Transmitter For Unmanned Excavators
Description
The FDM-615PTM is an advanced wireless communication module leveraging Frequency Hopping Spread Spectrum (FHSS) technology for superior immunity to noise and interference. It delivers reliable, long-distance, full-duplex Ethernet/serial communication in a compact and robust form factor, making it ideal for micro unmanned platforms.
The FDM-615PTM is the ultimate solution for secure, high-quality wireless communication on micro unmanned platforms, offering reliability, versatility, and performance for critical operations.
Key Features
|
Key Features:
Robust Long-Range Communication
Offers clear and stable NLOS video transmission with a range of 1-10 km for ground-to-ground applications.
Encrypted Transmission
Adopts AES128 encryption to protect video feeds from unauthorized access or interception.
Compact and Lightweight Design
Weighing just 280g, it is perfect for integration into small unmanned platforms while offering 10 watts transmitting power.
Plug and Play
Simplifies deployment with a user-friendly setup process, eliminating the need for complex binding procedures.
Dynamic Frequency and Power Control
Automatically adjusts frequency selection and transmitting power based on RF environment conditions to minimize interference and optimize performance.
Application
Autonomous Unmanned Platforms
Designed for unmanned excavators, tractors, cranes, robots, and vehicles, ensuring reliable video and telemetry communications.
Industrial and Tactical Operations
Supports operations in harsh RF environments, including urban, forested, and mountainous areas.
OEM Integration
Provides an API document and strong R&D support for OEMs to facilitate secondary development and seamless integration.
Specification
| GENERAL | ||
| Technology | Wireless based on TD-LTE Technology Standards | |
| Encryption | ZUC/SNOW3G/AES(128) OptionalLayer-2 | |
| Data Rate | 30Mbps(Uplink and Downlink) | |
| Range | 100km-150km(air to ground) | |
| Capacity | 32Nodes | |
| NLOS Range | 5-10km nlos ground to ground | |
| RF Power | 10Watts | |
| Latency | End to End: 60ms-80ms | |
| Modulation | QPSK, 16QAM, 64QAM | |
| Anti-jamming | Automatically frequency hopping | |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz | |
| SENSITIVITY | ||
| 2.4GHZ | 20MHZ | -99dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |
| 1.4GHZ | 20MHZ | -100dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |
| 800MHZ | 20MHZ | -100dBm |
| 10MHZ | -103dBm | |
| 5MHZ | -104dBm | |
| 3MHZ | -106dBm | |
| FREQUENCY BAND | ||
| 2.4Ghz | 2401.5-2481.5 MHz | |
| 1.4Ghz | 1427.9-1447.9MHz | |
| 800Mhz | 806-826 MHz | |
| POWER | ||
| Power Input | DC 24V+-10% | |
| Power Consumption | 30watts | |
| COMUART | ||
| Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level | |
| Control Data | TTL mode | |
| Baud rate | 115200bps | |
| Transmission Mode | Pass-through mode | |
| Priority level | l Higher priority than the network port. When the signal transmission is crowed, the control data will be transmitted in priority | |
| Note:l The data transmitting and receiving is broadcast in the network. After successful networking, each FDM-615PTM node can receive serial data.l If you want to distinguish between sending, receiving and control, you need to define the format yourself | ||
| INTERFACES | ||
| RF | 2 x SMA | |
| Ethernet | 1xJ30 | |
| COMUART | 1xJ30 | |
| Power | 1xJ30 | |
| Debug | 1xJ30 | |