IWAVE COMMUNICATIONS CO.,LTD
Iwave Communications Co., Limited.
Add to Cart
Tactical Wirelss Software Defined Radios Transceivers for Unmanned Systems
Introduction
FD-610X is a broadband data transmission Software Defined Radios that supports MESH networking. Based on the LTE terminal wireless communication standard, FD-610X adopts OFDM and MIMO technology and supports multiple bandwidth allocations (1.4MHz, 3MHz, 5MHz, 10MHz, 20MHz).
IWAVE is at the forefront of developing next-generation broadband tactical data links, specializing in advanced wireless communication solutions for unmanned systems. Our cutting-edge radio embedded SoC communication systems, utilizing OFDM and MIMO technology, deliver exceptional range and stability, making them ideal for high-mobility platforms such as unmanned aerial vehicles (UAVs), unmanned ground vehicles (UGVs), and unmanned surface vessels (USVs).
Using AT command to remotely control a UAV swarm
| High-rate serial port data transmission: the baud rate is up to 460800
Multiple working modes of the serial port: TCP Server mode, TCP Client mode, UDP mode, UDP multicast mode, transparent transmission mode, etc.
MQTT, Modbus and other protocols. Supports serial port IoT networking mode, which can be used flexibly for networking. For example, users can accurately send control instructions to another node (drone, robot dog or other unmanned robotics) through a remote controller instead of using broadcast or multicast mode. |  |
Specification
Software Defined Radios (SDRs) and IP Mesh Radios for UAV, Drones, UGVs and Robotics
| Transmitting | Master control module image acquisition device for data acquisition and encoding | Camera |
| The main control module send the encoded data to FD-610X through the USB or HSIC interface | Physical interface USB/HISC, logically virtual into a network card | |
| Receiving | FD-610X sends the encoded image data to the receiving end through the air interface. | |
| The FD-610X receiving end gets the encoded image data and then transparently transmits it to the main control module. | ||
| FD-610X sends data to the main control module via USB or HSIC interface. | Physical interface USB/HISC, logically virtual into a network card | |
| After the main control module receives data, it performs image decoding and display. |
| PCB Size | 43.40*45.00*3.00mm | Tolerance | |||
| 43.40±0.15mm | |||||
| 45.00±0.15mm | |||||
| 3.00±0.10mm | |||||
| RF | Frequency | 2.4Ghz: 2401.5-2481.5 MHz | |||
| 1.4Ghz: 1427.9-1467.9MHz | |||||
| 800Mhz: 806-826 MHz | |||||
| RF Power Level | 25dBm | ||||
OEM/ODM Service:
If you want to display your own brand LOGO on the goods such as cable, package bag, label or any where. It is no any problem. Our OEM and ODM service is always ready to do it.
If you want to second develop this Software Defined Radios to your own system or device, IWAVE R&D team will fully support you with footprint drawing, pinout and reference schematic document.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- Internatioal air: CA, AA, EA, etc
- By sea