IWAVE COMMUNICATIONS CO.,LTD
Iwave Communications Co., Limited.
Add to Cart
Secure Wireless Military Sdr Radio UAV/Drone Data Links for BVLOS Communications
Introduction
The FD-610X is a compact, lightweight tri-band wireless Software Defined Radios that is designed for integration into small and medium UAVs.
Featuring RF connectors for external antennas as well as Ethernet and serial interfaces, the ultra-low weight radio transceiver with advanced electronic beam-forming provides end-to-end IP connectivity for efficient integration, interoperability and seamless data exchange. The unit provides AES-128 hardware encryption.
FD-610X is available in convenient form factors – an OEM module for easy integration into any platform, and a standalone connectivity solution.
Radios provide resilient connectivity for drones and robotic platforms that encounter significant environmental or situational RF interference.
Benefits of Military Sdr Radio
Frequency flexibility: FD-610X SDR Radios support 800Mhz, 1.4Ghz and 2.4 GHz; a total of 120 MHz spectrum, with FHSS to avoid interference.
Advanced interference-avoidance/Anti-jamming: adopts OFDM and MIMO technology and adaptive modulation for optimal performance in noisy and adverse environments
Channel optionality: Ability to choose 1.4, 3, 5, 10 or 20MHz channel BW to match performance requirements; Smaller channels provide lower throughput, but longer range
Long range: Field-proven up to 10km
Low-latency: The Ultra-Reliable Low Latency Channel (URLLC) segregates video data from C&C signal, ensuring low latency, unbroken video feed and seamless robotic operation
Fast roaming: Collision-avoidance for fast-moving ground robotics, like AMRs or quadrupeds
Application
|  |
Specification
| Transmitting | Master control module image acquisition device for data acquisition and encoding | Camera |
| The main control module send the encoded data to FD-610X through the USB or HSIC interface | Physical interface USB/HISC, logically virtual into a network card | |
| FD-610X sends the encoded image data to the receiving end through the air interface. | ||
| Receiving | The FD-610X receiving end gets the encoded image data and then transparently transmits it to the main control module. | |
| FD-610X sends data to the main control module via USB or HSIC interface. | Physical interface USB/HISC, logically virtual into a network card | |
| After the main control module receives data, it performs image decoding and display. | ||
| PCB Size | 43.40*45.00*3.00mm | |
| RF | Frequency | 2.4Ghz: 2401.5-2481.5 MHz |
| 1.4Ghz: 1427.9-1467.9MHz | ||
| 800Mhz: 806-826 MHz | ||
| RF Power | 25dBm | |
| Sensitivity (Access) | 2.4Ghz(24415 Channel) 20Mhz:-99dBm 10Mhz:-103dBm 5Mhz:-104dBm 3Mhz:-106dB | Access |
| 1.4Ghz(14379 Channel) 10MHz:-103dBm 5Mhz:-104dBm 3Mhz:-106dBm | Access | |
| 800Mhz(8160 Channel) 10MHz:-103dBm 5Mhz:-106dBm 3Mhz:-108dBm | Access |
| Interface | UAR | 1 |
| COM-UART | 1 | |
| HSIC | USB 2.0 High Speed | |
| US | USB 2.0 High Speed | |
| I2C | 1 | |
| GPIO | 6 | |
| JTAG | 1 | |
| Antenna | 2 |