IWAVE COMMUNICATIONS CO.,LTD
Iwave Communications Co., Limited.
Add to Cart
Model: FDM-6823FT
Reliable Long Range Video Wireless IP Radio System
FDM-6823FT provides wireless communication link of HD video, data and serial control data based on IP.It is designed based on CA(Carrier Aggregation), MIMO technologies. It doesn't rely on any carrier's base station.the strong transmission data rate capability allows it to provide a stable video transmission link between two objects over a long distance especial in NLOS.
FDM-6823FT automatically negotiates routes with all nodes through the link layer, without manual configuration, plug-to-play. It can quickly build a communication network anytime and anywhere with the characteristics of rapid deployment, high compatibility, low power consumption, and high bandwidth.
Features
Networking: Point-to-Multipoint (PTMP) star topology.
MIMO: 2x2 configuration for enhanced throughput and link reliability.
Frequency Options:
Standard bands + optional 1.4 GHz or 600 MHz (suitable for long-range NLOS).
Bandwidth Flexibility: 1.4/3/5/10/20/40 MHz (adaptable to interference/range needs).
Max Output Power: 2x 33 dBm (2W per radio chain).
Range: 10–30 km (ground-to-ground, line-of-sight)
MESH Network Management Software
IWAVE self-developed MESH network management software will real time show you the topology, RSRP, SNR, distance, IP address and other information of all the nodes. The software is WebUi based and you can login it anytime anywhere with IE browser. From the software, you can configure the settings per your requirement, such as working frequency, bandwidth, IP address, dynamic topology, real time distance between nodes, algorithm setting, up-down sub-frame ratio, AT commands, etc.
CA(Carrier Aggregation) technology
It adopts carrier aggregation technology CA technology
1. Supports a larger total bandwidth, supports 20MHz+20MHz carrier aggregation, and the data transmission peak rate exceeds 100Mbps.
2. Supports continuous carrier aggregation and non-continuous carrier aggregation, which is more flexible.
3. Supports carrier aggregation of different bandwidths, and can adjust the bandwidth of carrier aggregation
according to environmental interference and available spectrum resources, making it easier to adapt to different scenarios.
4. Retransmit on different carriers to avoid data interruption after a single carrier is interfered.
5. Supports frequency hopping of different carriers to more effectively find interference-free carriers.
Application
Between two targets with long-distance video stable transmission requirements
Electricity and hydrology line patrol observation
Fire and security emergency communication
Real-time monitoring areas with public networks.
Specification
|
GENERAL |
|||
| TECHNOLOGY | Wireless based on TD-LTE Technology Standards | MOUNTING | POLE MOUNT |
| ENCRYPTION | ZUC/SNOW3G/AES (128/256) OptionalLayer-2 | ||
|
MECHANICAL |
|||
| NETWORKING TIME | ≤5s | TEMPERATURE |
-20℃~+55℃ |
| DATE RATE | 30Mbps (Uplink and Downlink) | Waterproof | IP66 |
| DIMENSIONS | 216*216*70mm | ||
| SENSITIVITY | 10MHz/-103dBm | WEIGHT | 3kg |
| RANGE | LSO 10km-30km (Ground to ground)(Depends on the actual environment) | MATERIAL | Aluminum Alloy |
| NODE | 64 nodes | MOUNTING | Pole-mounted |
| MIMO | 2*2 MIMO |
POWER |
|
| POWER | 2watts | VOLTAGE |
DC24~27V Or AC |
| MODULATION | QPSK, 16QAM, 64QAM | POWER CONSUMPTION | 30watts |
| ANTI-JAM | Automatically frequency hopping |
INTERFACES |
|
| LATENCY | End to END: 60ms-80ms | RF | 2 x N-Type |
|
FREQUENCY |
ETHERNET | 1xRJ45 | |
| 1.4Ghz | 1.4G(1420-1530Mhz) | ||
| 600Mhz |
600Mhz(566-678Mhz) |
||
|
SENSITIVITY |
||
| 1.4GHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| 800MHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| INTERFACES | |||
| RF | 2 x N-Type Antenna Port | ||
| PWER INPUT | 1 x Ethernet Port(POE 24V) | ||
| Other | 4*Mounting Holes | ||